EyezOn Forum

Not exactly. I am sure Vista 20P with earlier versions of firmware can also work with EVL-3. However, there might be a problem to connect EVL-3 to a wireless bridge even with the latest version firmware.

My Vista 20P panel has the latest firmware, version 9.12.

The panel is on first floor and router is on second floor. Fortunately, there is a empty space between the attic and first floor so that I could drop the wire from the attic to the panel. I tried wireless bridge. Even I could verify the bridge was working by connecting a laptop at the end, the EVL-3...

I failed to connect EVL-3 to a wireless bridge. Did not do a lot of research to resolve the problem because it was not very hard for me to run a CAT5 wire through attic.

I have EnvisaLink 3 installed on Vista 20P panel and can read all the status on Eyez-on website. Therefore, I assume the EnvisaLink 3 with Vista 20P supports TPI.

Tested on Vista 20P: Set the HostName, port(default to 4025), UserName(user), Password. Check the check box "Connect on start". Started the app several times, never log in to the board. Could not do anything without login. When clicking on the Lock icon on top right of the screen, got erro...

The EnvisaLink TPI shows: Command 620: Duress Alarm, A duress code has been entered on a system keypad. At least, the Board can generate this alarm. But, do not know if the CS monitors this alarm. I am also planning to switch to EnvisAlarm. However, I would like to read some reviews before actually ...

If you want to access the board by using a remote browser, you need to forward a port to the port 80 on board. such as: http://youRouteRemoteIP:8080. and forward 8080 to localIP:80.

You need to config your route to forward an external port(you pick the number) to port 4025 on EnvisaLink board. Configure the app to access your route's external IP and the port you forwarded on the route.

The EnvisaLink 3 currently can only be monitored by one company found in this forum. The monitoring company is ULC certified.
What is the difference between UL and ULC standard?

Thanks.