EyezOn Forum

Mine is working again.
There is a EYEZ-ON post on this issue. See "Temporary Envisalerts Issues" on top of this forum.

I have the same problem with my DSC-1555.
It seems to be recent.
It just piles up disarm commands in the queue, without disarming the system.
Is there a way to clear those commands and regain remote control of the system ?

It was easier and cheaper for me to bring the EVL3 close to the router (i.e pull a small 4 conductors cable rather than an ethernet one). It also groups all the LAN/WAN flashing leds together. By the way, my DSC installation manual states : " All modules connect to the system via a four wire Keybus ...

Mine is 50 feet away.
No problem !

vgy : Thanks for your wise input. I will however keep it simple : 1) set PGM1 on "Armed Status" - PGM output option [5] 2) enable "Motion detection alarm" on the camera 3) wire a relay between PGM1 and the camera 5v power line This should do the work and automatically switch on/off the camera (and ...

Based on installation manuals found on the Web, there would be 3 versions of the DSC PC 1555 : 1) DSC Classic PC1555 Software version 2.0 2) DSC Classic PC1555 Software version 2.3 3) DSC Power632 PC1555MX Software version 2.3 I have a DSC PC1555 of type 2 manufactured in April 1999 (code CCEJ) and ...

Is there a way to sync a Foscam camera "Motion Detection Alarm" feature with the pannel arm/disarm commands ?
i.e : Foscam Motion Detection Alarm feature would be armed when the pannel is armed and disarmed when pannel is disarmed ?

Be aware that the video shows that the EVL black wire connects with the yellow wire on the panel bus. I guess that this is not correct and that it should connect with the black one.