EyezOn Forum

Do you perhaps have zone followers enabled?

What are the subjects from those other emails? Yours just show disarm of the system.

You would enter that into the custom sequence field and not the bypass field.

Also you can enter a command string if it's a DSC

Example :
To bypass zone 1, 5 and13
Enter *1010513#

Where:
*1 For bypass command
Followed by all the zones you want (2 digits)
Finish with a #

Is your system a DSC? You can use zone 99 and it will recall the zones bypassed when it was last armed.

Delays should be added only where needed. Having a delay means giving a thief that much more time to try to disable your alarm. If someone tries to climb through a window, obviously this is abnormal condition, so window contacts and motions would be instant alarm. If you were coming home, then you ...

Your entry door should have been setup with a contact with entry delay to give you a chance to disarm. If not possible to in install contact then change the motion to include a delay but obviously being less than ideal.

Had a little chat with a DSC rep today. Says that the keybus on the current power series is not currently compatible with the NEO setup which is a RS422 encrypted setup. He mentioned that they may release a bridge but until I see it will I believe it. One reason he mentioned is to prevent the use of ...

I've done something similar. I setup a gmail address that I use to forward only select email eyezon messages. You can set to exclude or forward with specific keywords within the email.

I have this as shown on both regular and mobile portal.

HVAC1
Inside Temperature #1: 20 °C
Outside Temperature #1: 129 °



Keypad shows external as -1°C so unless there a huge fireball outside my place that I don't know about ...

You should be using only 2 digits for the zone #. In your example: *8 5555 804 09 3*6*3*3*27 # Am I correct that you have the ESN of 3F3C27 ? Each press of the * toggles between decimal and HEX (letters) and when in HEX mode the ready light flashes. When entering the ESN, it should not beep multiple ...