EyezOn Forum

Your alarm panel should have 2 PGM outputs but they have to be programmed. Another option is an RB5 relay or a PAM2 relay on the siren output.

After the update my text notifications come thru wrong and I have this on my main screen.
Error:*29 Programming on panel not completed properly.

Nothing changed on my end but this firmware update. Vista 128FBP

TOMCOM wrote:So I guess VOIP phone is not considered as a telephone line because that's what I have.

Please excuse my ignorance, what is 48Vdc?

48 volts direct current

I know this is a bit off-topic, but I just installed an EnvisaLink and could use some assistance configuring my panel. I've got a Vista 15p with two 4219's exp modules, and would like to add a new zone for my Basement Watchdog Backup Sump Pump. On the pump, I've got I've got terminals for normally ...

are you not seeing them on the web page on a computer or do you mean on your android with the webpage/app thingy? On the web page I had to add the cameras in under the camera tab then they showed up. The issue I had is no pan tilt or voice unless I use safari. With Firefox I have to disable the ...

That's worse than using the "firefighter" module. Now you're mixing high voltage equipment with low voltage equipment. If you want to add fire/CO protection on your security system, do it the right way or don't do it at all. It's safe. They are dry contacts and there are literally hundreds of high ...

Just use one of these.

http://www.kidde.com/home-safety/en/us/ ... es/sm120x/

and wire it to a zone on your panel

I have 4 Foscam IP cameras (FI8910W) that I can see fine but they won't move with Firefox. When I use Safari it works.

I got it working finally. For anyone else using a Vista 128FBP make sure your keypads that are AUI are lower than non AUI ones. Once I moved my touch screen to address 1 it started working. My 6160V is at address 2, the EVL3 is using 3, 4 is my voice module, 5 is my RF receiver and 7 is my output ...