EyezOn Forum

cjhrph wrote:Is it possible to use the EVL4 to program the DSC 1832 using the DLS 5 software over IP instead of using the phone line?

Were you successful?

To brute force to find my installer code I had to disarm my system first (I was given the wrong user code), I managed to figure it out what commands to send and modified the shared script to brute force for a user code. The only issue in my script is my IF statement at the end to catch the user code...

Wow, this is awesome breakdown. I too observed this and it's quite handy!

Could I modify the script to brute force to simulate keypress to disarm the partition with user code? Something like this: 1. send command 040 + 1<usercode> 2. look for a response code of 650, 655 or 750 (any other response code would be indicate a failure) <loop again if not 650, 655, or 750) Two t...

The 5108A response seem to indicate the panel has been armed in stay mode. 671 says the function isn't available (maybe a response to the *8 to enter installer programming while armed). 652 says the partition has been armed, looks to be in stay mode. Yeah, MikeP has it right. You can't go into inst...

Thanks for the script.. login was successful but the response coming back doesn't looks right. it's just waiting for response and doesn't progress nor does it terminate. Here's my output. Any ideas what it's stuck at response code "65211FF"? [20220120_195156] DEBUG: Connected to EnvisaLink...