EyezOn Forum

I'd like to see an HTTP command (such as http://192.168.0.50/2?A=5&p=1&X=1111) for EVL3 and EVL4 to allow setting of additional alarm states other than "off" and "instant arm." This would allow easy use with HA-Bridge and Amazon Echo skills. The most important one to allo...

Unfortunately there is no direct communication between Eyezon's servers and the Central Monitoring Stations we use across North America. Your Envisalink communicates directly with the station and does not rely on Eyezon's servers to relay your alarm signals. This makes it much more reliable than an...

I requested this several years ago, but I will request it again... I would like to see the capability of putting the system into test mode via the web portal. Not only would it be more convenient than calling the central station, but doing it this way could also cause any text messages generated whi...

1. Dial out using SIP VOIP. Since I am running an asterisk system, it would be nice if the EVL can dialout alerts. If you have Asterisk, you could install the Contact ID alarm receiver application. You can then implement your requested feature yourself just exactly as you would like it to work. htt...

Why couldn't the camera data stream be unencrypted from the customer camera to Eyez-on and be encrypted using the Eyez-on SSL cert from the Eyez-on portal to the customer? Everything to the customer would be SSL encrypted with no active-mixed-content issue for the browser to complain about. I unders...

I have a Foscam FI9821P and I am also not able to use PTZ. Watching the Camera with Wireshark I see nothing in HTTPS mode attempted to the camera. Using an obsolete browser version with the Eyez-on portal, I am able to make PTZ work and see cmd=ptzMoveLeft and cmd=PtzStopRun commands being sent to t...

Would it be possible to select (with checkboxes) which zones I want to arm? You didn't say which panel you have, but have you experimented with doing this using a Macro function? The Vista 20P users guide shows an example of a Macro where zone bypass of two zones is followed by an away arm. While n...

This doesn't seem to happen very often around here, but it looks like Eyez-on did actually implement part of a feature request. Starting on 11/30/15, I've started seeing "Away arming by user xxxxx" instead of "Closing by user xxxx." The feature request was to have "arm"...

rppower wrote: without a land line or an alphanumeric keypad, there is no way to program my vista 20p.

Compass software, telephone line simulator, modem.
Honeywell published a simple circuit in a bulletin that can be used in place of an actual telco line simulator.

What are the improvements for the larger professional market?