I currently have the ELV-3 installed on my DSC 1832 panel. I need to install the DSC IT-100 RS232 serial module to integrate my panel to the Lutron RadioRA2 lighting main repeater. I've tried using Vera Lutron RadioRA2 plugin as an alternate but it's not super reliable.
My question is: can I connect both ELV-3 and IT-100 to the DSC 1832 panel? They both connect using the 4 keybus wires. Also, does the ELV-3 take up a slot on the panel? My understanding is the IT-100 needs to be assigned to slot 8. Thanks.
Connect both ELV-3 and DSC IT-100
Moderators: EyezOnRich, GrandWizard
-
GrandWizard
- Posts: 2354
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Connect both ELV-3 and DSC IT-100
Yes, you can connect both at the same time. You do know that the Envisalink has the IT-100 protocol built-into it right?
-
dougpark464
- Posts: 21
- Joined: Tue Aug 29, 2017 6:18 pm
Re: Connect both ELV-3 and DSC IT-100
Thx, for the info on the protocol being built into the Envisalink.
My understanding is the Lutron RadioRA2 main repeater only integrates via RS232 to the DSC 1832 panel with predefined phantom buttons. Has anyone had any experience integrating the main repeater to the DSC panel using Envisalink? Both are on the same network. Thx.
My understanding is the Lutron RadioRA2 main repeater only integrates via RS232 to the DSC 1832 panel with predefined phantom buttons. Has anyone had any experience integrating the main repeater to the DSC panel using Envisalink? Both are on the same network. Thx.