DOES NOT RECOGNIZE HONEYWELL

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
bobnich
Posts: 2
Joined: Mon Nov 13, 2017 1:58 pm

DOES NOT RECOGNIZE HONEYWELL

Post by bobnich »

EVL4 installed correctly and honeywell vista 20 enabled second keyboard (address18) and verified that #191 = 10. Power cycled and communicates with browser but says it is DSC instead of honeywell. KEYB and ONLINE lights flash but other are green. Do I need to do something else to get it to download the honeywell firmware or how can I install honeywell firmware? I created account several days before and verify that MAC is correct.
Top
GMc
Posts: 38
Joined: Thu Dec 03, 2015 7:27 am

Re: DOES NOT RECOGNIZE HONEYWELL

Post by GMc »

That's strange, I have the same panel and EVL4 with no issues. Did you follow the attached documents?
Attachments
Envisalink3 Quick Start EyezOn.pdf
(170.16 KiB) Downloaded 390 times
Envisalink4 Installation and Programming Guide.pdf
(824.57 KiB) Downloaded 428 times
Top
bobnich
Posts: 2
Joined: Mon Nov 13, 2017 1:58 pm

Re: DOES NOT RECOGNIZE HONEYWELL

Post by bobnich »

got it now- with my eyesight I copied the MAC code as 8D which is actually BD. Could see it when I connected tot eh board with a browser but took me lots of cycles to notice that.
Thanks
Top
GMc
Posts: 38
Joined: Thu Dec 03, 2015 7:27 am

Re: DOES NOT RECOGNIZE HONEYWELL

Post by GMc »

Good to hear you got it.. oh how I know what you mean about the eyes :lol:
Top
Post Reply

Return to “EnvisaLink ( IP100D, IP170D, 2DS, 3, 4)”