Newbie needs help to suppress reports via EnvisaLink

[hwitten]

I converted from a DSC PC3000 to a PC1832 with EVL4. Self monitoring via POTS to cell and EnvisaLink to App.
Plan to go EnvisAlarm once all configured.

My dilemma of sorts is that I'd like to add some Motions outside but I don't want them to report triggers via EVL4, only POTS.
I'm trying Type 26 but if I read correctly, there would be no reporting at all.

Since I see the zone configured as Type 26 in my HA setup, I could work with that but thought I'd check to see if there is a better way available to only sent report to POTS.

[hwitten]

With a few reads and no replies I assume Type 26 is the way to go.

I will have a few sensors as type 26. Should I put them all in their own partition?
Partition 1 would be armed/disarmed as per keypads. Normal communications, POTS and EnvisLink/EnvisAlarm.
Partition 2 would have all the 26's and may never be armed.

It would be great if arming partition 2 could send alarms only the POTS way but I assume that's not possible?