Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
Posts: 1
Joined: Sat Nov 18, 2023 8:30 pm


Post by Linet »

I have a EVL4 monitoring my pc1832 and I was wanting to add more hardwire zones. I have a UNO8 that I plugged into the evl4, it detects the module on the evl4 webpage. It also gives an supervisory when unplugged on the app. Is it possible to program the uno8 as a expander with this setup? 903 shows keypad and 5400 (evl4) only so far.

Thanks in advance.
Posts: 2280
Joined: Tue Nov 16, 2010 4:08 pm

Re: UNO8

Post by GrandWizard »

The UNO8's only work in Standalone (SA) mode, when the Envisalink is the sercurity panel, or if you have one of the new UNO panels.

If you have a DSC panel, you need to purchase a PC5108 to add an extra 8 zones to your system.
Post Reply