I have some PK5500 keypads that I need to program for their appropriate slot and partition.
I have tried the DSC method which does not get me to the slot and partition any longer.
I attempted to use the information in the UNO5500 guide and came to some numbers to change, but that apparently did not change what I needed.
Any suggestions would be appreciated.
Thanks!
Howard
How do I Program DSC Keypads for Slot and partition?
Moderators: EyezOnRich, GrandWizard
-
- Posts: 4
- Joined: Wed Oct 09, 2024 8:49 am
-
- Posts: 2335
- Joined: Tue Nov 16, 2010 4:08 pm
Re: How do I Program DSC Keypads for Slot and partition?
Its the same on UNO as for a DSC panel. Make sure you have the latest firmware for your UNO.
If you are still having problems submit a tech support request from your Eyezon portal for more assistance.
If you are still having problems submit a tech support request from your Eyezon portal for more assistance.