I notice that the Max temp setting for HVAC on the web page is 86 degrees. My house is in the desert and is usally empty during summer months and I keep AC set at 90-95. I do this either via the EMS thermostat or via Escort dial in. Is it a limitation of the webpage that only allows Max Temp of 86?
Thanks
HVAC Controls Max Temp setting
Moderators: EyezOnRich, GrandWizard
Re: HVAC Controls Max Temp setting
I Should have put this in the main post as well. I see there is no way to change the mode. It displays what mode it is set but no button to change. is the a programming limitation of the module?
-
- Posts: 2277
- Joined: Tue Nov 16, 2010 4:08 pm
Re: HVAC Controls Max Temp setting
Sorry for the delay on this, I had to ask around. The upper limit for AC is limited on the webpage to 30 degrees celcius (86 F). The best answer I can find for why is the developers thought if they made it anything higher, well, you might as well turn it off (or move somewhere cooler).
I will put a feature request into the portal developers to put this up to 35 (95 F). Or you could move.
I will put a feature request into the portal developers to put this up to 35 (95 F). Or you could move.
Re: HVAC Controls Max Temp setting
thanks for looking at it. I had just assumed it would have had same functionalty of the escort. I can see the normal reasons for the upper limit for occupied places probably more ciritical for lower limits for freeze protection.
thanks!
thanks!
Re: HVAC Controls Max Temp setting
Hi Grandwizard! thanks for the changes. Just noticed.
Is it possible to create a button for the modes? heat/cool/auto?
I see the button for day/night Don't know how many use that feaure or not?
How many on here have an EMS thermostat and use the web page for functionality?
Is it possible to create a button for the modes? heat/cool/auto?
I see the button for day/night Don't know how many use that feaure or not?
How many on here have an EMS thermostat and use the web page for functionality?
-
- Posts: 2277
- Joined: Tue Nov 16, 2010 4:08 pm
Re: HVAC Controls Max Temp setting
Hi, the heat/cool/auto/off is already in the feature "to-do" list.
I would think that most people use the occupancy modes (day/night/morning/aux). It is probably the best feature of the EMS-100.
How many people have an EMS-100? Based on tech support issues, I wouldn't say very many at all.
I would think that most people use the occupancy modes (day/night/morning/aux). It is probably the best feature of the EMS-100.
How many people have an EMS-100? Based on tech support issues, I wouldn't say very many at all.