Network supervision seems to be quite broken...

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
Moofo
Posts: 8
Joined: Sun Mar 10, 2013 9:34 pm

Network supervision seems to be quite broken...

Post by Moofo »

I get a bunch of warnings in the evenings. As I am streaming and not using my connection fully, I know it is not down.

I'm with Teksavvy on a 25/10 connection Firewall is a Pix 515.

I think something is wrong on the server side.
Moofo
Posts: 8
Joined: Sun Mar 10, 2013 9:34 pm

Re: Network supervision seems to be quite broken...

Post by Moofo »

Ok, either bandwith, CPU or else something is wrong.

Sending commands to my panel takes around 5 minutes for them to take action. They stay in the command queue for that time. Normally it is almost instantaneous.

I also have the case that my partition is shown as "Offline"..

What is going on ?
GrandWizard
Posts: 2335
Joined: Tue Nov 16, 2010 4:08 pm

Re: Network supervision seems to be quite broken...

Post by GrandWizard »

Normally that means your account is seeing high packet loss.
Moofo
Posts: 8
Joined: Sun Mar 10, 2013 9:34 pm

Re: Network supervision seems to be quite broken...

Post by Moofo »

I'll test for packet loss.

However, I have no problem during the day. It's only in the evenings it's not working.
Moofo
Posts: 8
Joined: Sun Mar 10, 2013 9:34 pm

Re: Network supervision seems to be quite broken...

Post by Moofo »

I have 4% packet loss in some periods.

My ISP is looking at it.
Post Reply