5580TC help

[mm123]

Hi,

I have an install question about an Escort 5580tc and an ems-100. I assumed I would just hook up the red/black/green/yellow wires to the main control panel (pc1832) and run the 3 wires required from the 5580tc to the ems-100 thermostat. I thought after this I would immediately be able to view the thermostat online.

Could somebody please help.

Is there some wiring I may not know about or is there specific programming I need to involve?

Thanks in advance for any help.

[quatchi]

You need to go in to the 5580TC programming (from your phone) and go to section 800 and enable option 1 for thermostat 1.

e.g. [800] Thermostat 1 Options
Default Option ON OFF
OFF 01 Thermostat 1 enrolled Thermostat 1 not enrolled
OFF 02 Thermostat 1 EMS-OTS sensor connected Thermostat 1 EMS-OTS not connected
ON 03 Thermostat 1 Heat enabled Thermostat 1 Heat disabled
ON 04 Thermostat 1 Cool enabled Thermostat 1 Cool disabled
OFF 05 Day Setting follows Sched./Output always Day Set. follows Sched./Output only if mode ON
OFF 06 Night Setting follows Sched./Output always Night Set. follows Sched./Output only if mode ON
OFF 07 Aux. Setting follows Sched./Output always Aux. Set. follows Sched./Output only if mode ON
OFF 08 Away Setting follows Sched./Output always Away Set. follows Sched./Output only if mode ON