I have a Foscam that I would like to add. I went through the Activate Device in my Eyez-on account, selected IP100D and entered my wireless MAC address with a camera name.
I am not seeing the camera yet. It says "None Installed". I have left the Foscam default ports. Am I missing anything?
Thank you,
Ryan Johnson
Adding Camera
Moderators: EyezOnRich, GrandWizard
-
GrandWizard
- Posts: 2320
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Adding Camera
You just activated an IP100D, not a camera.
Click on the camera icon from your portal account and then hit "Add Camera" on the right-hand side of the drop-down pane.
Remember to follow all of the Foscam instructions for port forwarding your router first, before you add the camera.
Click on the camera icon from your portal account and then hit "Add Camera" on the right-hand side of the drop-down pane.
Remember to follow all of the Foscam instructions for port forwarding your router first, before you add the camera.
-
ryanjohnson00
- Posts: 4
- Joined: Fri Nov 01, 2013 10:57 am
Re: Adding Camera
Wow, I missed the big "Add Camera" link on that page. Thank you!
I am guessing if I have a FI9821W Indoor camera with Pan/Tilt that it would be OK to select "FI8910W Indoor PT"?
I am guessing if I have a FI9821W Indoor camera with Pan/Tilt that it would be OK to select "FI8910W Indoor PT"?