IP100D Compatibility & Module Reset

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
mark
Posts: 1
Joined: Sun Mar 09, 2014 6:03 pm

IP100D Compatibility & Module Reset

Post by mark »

I am changing locations of a previously installed and functioning EYEZ-ON IP100D. I want to confirm that the IP100D is compatible with DSC PC1832. Forum articles indicate that the 2DS is compatible but I couldn't find IP100D compatibility.

There was a very informative article on the 2DS and 3 to factory reset the module (IP subnet, Password, ...). Is there any information to reset the IP100D module? There is not a set of pins labeled H3, SI and SO as there are on the 2DS or 3. Can someone provide some insight how to reset the board?

Thanks for any help!
GrandWizard
Posts: 2375
Joined: Tue Nov 16, 2010 4:08 pm

Re: IP100D Compatibility & Module Reset

Post by GrandWizard »

There is nothing to reset on a IP100D. You can't configure any of the network settings on this ancient module, all must come from DHCP.
Post Reply