New Feature Requests

[Lumpy]

Hello,

Any way to show the Zones as:
Green = Open
Red = Closed

Rather than white on black?

[ShaneB]

@Bill_in_NZ: Are you sure you need to use a paid email-to-SMS service? In the USA the major phone carriers have set up a system where you can send a text from an email account for free but most people are just unaware of it.

For instance: To send an SMS text from any email account to an AT&T mobile phone customer, you just send the email to "phonenumber@txt.att.net". I recommend checking to see if you can do that as well with your carrier. There may be no need to pay for an email-to-SMS service.

Hopefully I understood your issue but at any rate I hope this helps!

-ShaneB

[BSides]

Please allow manual editing of the network settings instead of requiring DHCP. I have my Envisalink set to use a wireless backup cellular connection so that it can still communicate if someone were to cut our main line.

It's a pain and disruptive to the rest of the network to have to temporarily reconfigure DHCP just to assign the Envisalink the alternate gateway, netmask, and DNS server.

Thanks,
Brian

[djrobinsadsc]

um .... ok ...

[chromatel]

I would like to see one day(if possible) a local email client on the modules so it can send out its own emails without needing to connect to the cloud and mabye an xml page that has all the alarms and troubles. Also maybe an alternate firmware that models the tl-150 so it can be independent from the eyezon servers.

[hokie21]

I would like to see a selection on the web portal that allows the system to be put into test mode for 30 min, 1 hours, 2 hours, 4 hours, etc. This would be more convenient than having to phone the central station.

I would also like to see the text messages sent during test mode to be marked as "TEST MODE" so that other email/SMS recipients aren't alarmed by the messages.

[lonewolf]

I would like to see bypassed zones highlighted when the system is armed, say with a white background? Right now below "Armed" it says something like "Zones Bypassed" but it does not tell me _which_ zones are bypassed.

[lonewolf]

Edit: ok, I figured out how to do it with the current setup. See http://forum.eyez-on.com/FORUM/viewtopi ... 5292#p5292 . So, I'm changing this feature request to be the addition of a PIN box next to the "Arm Away" button in the portal.

My original post was:
I would also like to have the ability to arm "Away" with code (not "Stay" like it currently does) on my DSC PC1832 system. I know this is possible because my PTK5507 keypad can do it (press "arm away," enter code at the prompt, do NOT exit. When the exit timer expires it will be armed in away mode).

[Dave]

I would very much like to see a panic feature on the mobile portal.
The fixed keypads have panic buttons and the remote keyfobs have panic buttons so it would make sense for the third place it can bearmed and disarmed from to also have panic buttons.

[user17600]

I would like to see a selection on the web portal that allows the system to be put into test mode for 30 min, 1 hours, 2 hours, 4 hours, etc. This would be more convenient than having to phone the central station.

I would also like to see the text messages sent during test mode to be marked as "TEST MODE" so that other email/SMS recipients aren't alarmed by the messages.

Add another vote for this one, as I mentioned in a separate question thread.

I would suggest calling it NO ACTION mode, since you would be indicating that the Central Station should take no action during the period specified.