Vista 128FBP support?
Moderators: EyezOnRich, GrandWizard
-
GrandWizard
- Posts: 2319
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Vista 128FBP support?
Yes the Envisalink works with the Vista128 and supports ALL 8 partitions.
-
GrandWizard
- Posts: 2319
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Vista 128FBP support?
No, its free. Just read the Envisalink primer, it explains how to customise your account.
-
GrandWizard
- Posts: 2319
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Vista 128FBP support?
Absolutely, all alerts are free.
If you are having issues particular to your setup you should submit a support request as the forum is meant for issues that apply to all users.
If you are having issues particular to your setup you should submit a support request as the forum is meant for issues that apply to all users.
-
GrandWizard
- Posts: 2319
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Vista 128FBP support?
Yes, you should be able to swap out the board. You will obviously have to reprogram the panel.
We have a 128FBP in our office and it works fine. Did you remember that each user has to be programmed to send opening and closing rerports? The Vista128 has got to be the worst panel ever made from a programming point of view.
We have a 128FBP in our office and it works fine. Did you remember that each user has to be programmed to send opening and closing rerports? The Vista128 has got to be the worst panel ever made from a programming point of view.
Re: Vista 128FBP support?
I got it working finally. For anyone else using a Vista 128FBP make sure your keypads that are AUI are lower than non AUI ones. Once I moved my touch screen to address 1 it started working. My 6160V is at address 2, the EVL3 is using 3, 4 is my voice module, 5 is my RF receiver and 7 is my output relay module. Ademco tech support suggested it to me and it worked.