Speed

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
beeewooop
Posts: 1
Joined: Fri Feb 20, 2015 8:52 pm

Speed

Post by beeewooop »

I installed a EnvisaLink 3 for a friend yesterdat and notice it was really slow on the Wifi and on the 4G network. If my friend upgrades to Connect2Go Plus Status will he get a faster response time. It took 52 seconds to arm the alarm system and almost 2 mins to disarm the system.
GrandWizard
Posts: 2319
Joined: Tue Nov 16, 2010 4:08 pm

Re: Speed

Post by GrandWizard »

The longest portal delay is 30 seconds. If you are using a Wifi bridge then this is most likely the reason for the additional delay.
isriam
Posts: 13
Joined: Sat Dec 06, 2014 9:50 pm

Re: Speed

Post by isriam »

i remote arm/disarm with a 2 second delay, and thats from the internet, not intranet.
Flyct
Posts: 127
Joined: Sat Sep 14, 2013 10:27 pm

Re: Speed

Post by Flyct »

Mine takes anywhere from 10-30 seconds for the alarm to respond to commands via the web portal.

Besides the short delay, I have to say it's very reliable.

We usually set the alarm at night from my iphone that is at my bedside. We are used to the 30 second delay.
isriam
Posts: 13
Joined: Sat Dec 06, 2014 9:50 pm

Re: Speed

Post by isriam »

Actually you're right the eyezon website takes 30 seconds but the evl3 is almost instant.
Post Reply