EVL-4 and DLS 5 v 1.3

naimc · Post by **naimc** » Mon Oct 05, 2015 1:34 am

Hello I am newbee in every sense of the word.

I have new PC1832 alarm system, I just replaced an old PC5010, transfered all of the wiring to the new panel.

I was trying to connect to the PC1832 and the connected EVL-4 Using the DLS 5 V1.3 programming software.

I jumped right in thinking I could use the DLS software directly with an EVL-4. Can this be done ?

Here is what I did in the DLS 5 software I choose my panel tyhpe PC1832 v4.6, Next I select IP ( 172.0.0.22 (static IP I assigned to the device, reachable via http).

The DLS software always reports Could not connect to 172.20.0.22. In the communication settings parameters are the IP installed code : my default should be 5555, where do I find the communicator ID ?

What I am I missing in the setup ? ( I read a previous post that said the EVL-4 can be used by the DLS software)

thank you

GrandWizard · Post by **GrandWizard** » Mon Oct 05, 2015 4:36 pm

DLS is currently not available to Eyezon customers but will be available in the near future. Due to licensing fees it will only be part of our "Plus" package.

naimc · Post by **naimc** » Mon Oct 05, 2015 11:06 pm

Ok thank you for the response, which means the hardware can do it, but it's not offered to DIY end users. What is the license fee cost, can I add that to my existing new EVL-4?

So I am new the alarm programming stuff, but it seems very strange that I should be programming my panel with a key pad and funky codes, when the DLS software is available for FREE and has a modern UI.

I think it's strange I purchased hardware designed in 2015 that has the capability built-in, but I'll have to use technology from 90's; a serial gizmo : PCLINK-SCW connected on a Serial to USB adapter.

I got talk to the sales pepole at aartech.ca that recommned the EVL-4, they sure have their fact's wrong !

billinaz · Post by **billinaz** » Tue Oct 06, 2015 8:58 pm

Im using DLS and a TP150 to communicate with the panel.

The software is downloadable and works good once you get it set up. Much easier way to program the panel.

fiolin · Post by **fiolin** » Fri Oct 09, 2015 8:29 pm

Is tp150 a some kind of new product from ENVL?

GrandWizard · Post by **GrandWizard** » Sat Oct 10, 2015 9:26 am

I was wondering the same thing

stroh · Post by **stroh** » Sat Oct 10, 2015 3:11 pm

fiolin wrote:Is tp150 a some kind of new product from ENVL?

A google search shows it is a DSC product.
http://www.dsc.com/index.php?n=products&o=view&id=139

GrandWizard · Post by **GrandWizard** » Mon Oct 12, 2015 9:12 am

That is a TL-150, an early cousin of the Envisalink, and cannot do DLS.

EyezOn Forum

EVL-4 and DLS 5 v 1.3

EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3

Re: EVL-4 and DLS 5 v 1.3