Home Automation with Envisalink 3 & Vista20P

[GrandWizard]

http://apps.mios.com/plugin.php?id=6436

You should direct any questions to Vera tech support. We can't handle 3rd-party integration ourselves.

[EdC]

20P provides 2 On board soft relays. Relay 17 will sink 100 MA.
Pick up 12VDC under 100ma coil current relay. Will need wiring harness - I use keypad harness.
Relay 17 can be programmed for momentary activation. Relay 17 activation is capable from
keypad or may be able to macro. I need to set up friend to open his gate - have not gotten around to yet.

[cybrmage]

You might also look at the Vera line of home automation systems based on Z-Wave devices. Their engineers worked closely with the Envisacor engineers on integration with the Envisalink.

This is absolutely incorrect.

I am the author of the EVL3Vista plugin for Vera, and I have has no support from either Vera Controls nor Envisacor with regards to the creation of the plugin. Vera Controls did supply me (and other plugin developers) with a VeraEdge controller to assist with our efforts.

If there was any contact between Vera Controls engineers and Envisacor Engineers, the effort did not bear any fruit...

http://apps.mios.com/plugin.php?id=6436

You should direct any questions to Vera tech support. We can't handle 3rd-party integration ourselves.

This is also incorrect. Vera Controls does not support this plugin, and can not provide any support for this plugin!

All support for the plugin is done in the user forums at http://forum.micasaverde.com/index.php/ ... 602.0.html

[isriam]

I'm using smartthings with alarmserver to arm/disarm my dsc whenever i wish based on automation. also i can activate home automation features with door/motion sensors also.