Page 2 of 2
Re: Busy on Partition 1
Posted: Sun Mar 24, 2013 12:04 pm
by cman
yes, regular keypad is used.
Re: Busy on Partition 1
Posted: Sun Mar 24, 2013 12:06 pm
by cman
I have gone through both part 1 and Part 2 of the programming steps many times.
Re: Busy on Partition 1
Posted: Sun Mar 24, 2013 12:07 pm
by smyers119
Email support with your mac address and explain the problem, hopefully they can get you straightened out, and let us know what was wrong for future reference.
Re: Busy on Partition 1
Posted: Sun Mar 24, 2013 12:10 pm
by smyers119
Is your alarm system acting normal at the regular keypad? aka is the green ready light on and you can arm and disarm the system from it? Are you sure you are not using the same keypad address with 2 keypads? each keypad needs its own unique keypad address.
Re: Busy on Partition 1
Posted: Sun Mar 24, 2013 12:21 pm
by cman
keypad is ready and green. Keypad works fine. I only have 1 keypad on my system. I have tried using *190, 17 and others like *193, 20. I set them back to 0,0 and nothing seems to be working on the website. I cannot set zones and descriptions with the partition # on the website when managing labels.