Page 1 of 1
Change to static IP?
Posted: Mon Jul 21, 2014 4:19 pm
by VitaminC
I would like to connection my Envisalink 3 in my DMZ network which uses a 10.x.x.x network and does not have dhcp enable.
Is there a way to manually set static IP?
Re: Change to static IP?
Posted: Tue Jul 22, 2014 8:37 am
by GrandWizard
You need to use DHCP first to get an IP address, then you can make the module static from the "Network" page.
Re: Change to static IP?
Posted: Tue Jul 22, 2014 3:56 pm
by VitaminC
Where is this network page? I can logging into the device using web browser and it doesn't seem to work? Or is it located in portal?
Re: Change to static IP?
Posted: Tue Jul 22, 2014 11:12 pm
by VitaminC
Ok, I am now able to login to the local user config page for my EnvisaLink 3.
It only allows me to change the last digit the IP address? Is it possible to change from 192.168.1.XXX to 10.1.1.XXX??
Re: Change to static IP?
Posted: Wed Jul 23, 2014 8:27 am
by GrandWizard
Set your DHCP server to issue in the range of 10.1.1.X
Re: Change to static IP?
Posted: Thu Jul 24, 2014 10:59 pm
by VitaminC
Got it working how! Thx!