Page 1 of 1
CT-30 Thermo set away when armed away
Posted: Mon Aug 25, 2014 12:26 pm
by webstas
have you guys looked at adding an option to control the thermostat automatically during arming conditions?
Re: CT-30 Thermo set away when armed away
Posted: Mon Aug 25, 2014 6:33 pm
by webstas
Just saw this post
http://forum.eyez-on.com/FORUM/viewtopic.php?f=6&t=1269
how do i get the beta thermostat options in Envisalert+ is it a firmware push?
Re: CT-30 Thermo set away when armed away
Posted: Tue Aug 26, 2014 10:50 am
by GrandWizard
It's not a public beta test unfortunately.
Re: CT-30 Thermo set away when armed away
Posted: Tue Aug 26, 2014 12:02 pm
by webstas
Sad
do you have a rough eta on when it will be a public beta? or released?
I'm really excited about this feature
Re: CT-30 Thermo set away when armed away
Posted: Tue Aug 26, 2014 8:49 pm
by GrandWizard
It's not our call. Envisacor controls the firmware so it is up to them to decide on the release.
We haven't been asked to actively test it in QA so it will probably be a month or two. Not long.
Re: CT-30 Thermo set away when armed away
Posted: Tue Aug 26, 2014 9:12 pm
by DaveSin
I thought Release 1.11.128, coupled with Envisalerts+ allows full thermostat integration (no longer at Beta stage)?
Envisalink 2DS, E3-DSC, E3-ADM firmware 1.11.128 Release Notes:
New Features:
- Full support for 8 Partitions on Ademco panels
- Support for Eyezon STAT50 WiFi thermostat (compatible with the CT50, and 3M Filtrete)
- Fire, Ambulance, Panic buttons on DSC are now supported on the Eyezon Portal
.
.
.
GrandWizard wrote:It's not our call. Envisacor controls the firmware so it is up to them to decide on the release.
We haven't been asked to actively test it in QA so it will probably be a month or two. Not long.
Re: CT-30 Thermo set away when armed away
Posted: Tue Aug 26, 2014 11:14 pm
by GrandWizard
@DaveSin
No, 1.11.128 just allows real-time control and status of the thermostat. Scheduling and event-based control is coming. There are significant changes required on the Eyezon side to handle all the home automation rules. So the delay is not entirely the fault of the firmware.
Re: CT-30 Thermo set away when armed away
Posted: Wed Oct 01, 2014 5:30 pm
by webstas
Any news on when the beta/and or the feature pushed to us?