Page 1 of 1
loss of AC power but no alert
Posted: Thu Oct 27, 2011 8:35 pm
by geneg
I have a DSC1832 with a 2DS. I pulled electrical as a test. My keypad shows a trouble but it never shows up on the eyes on website. I was hoping to get an alert for this. Any ideas what could be wrong?
Re: loss of AC power but no alert
Posted: Fri Oct 28, 2011 12:37 am
by quatchi
Check section 377 of programming. Set AC failure delay to 000.
Default is 30 (you would see an alert after 30 minuites).
Re: loss of AC power but no alert
Posted: Fri Oct 28, 2011 9:57 am
by geneg
That worked thanks.