EyezOn Forum

I'd like to renumber my network from 192.168.1.x to 192.168.10.x and it seems, from the web interface, you can only change the last quad of the the EnvisaLink 2DS address, I.E. it appears to the hard-coded into the 192.168.1.x address range. Short of some port-forwarding calisthenics in the router, does anyone know a way to alter this?

Nothing is hardcoded. If your DHCP server puts you on 192.168.1.xxx then that is the subnet the Envisalink is on. If you change your network, and DHCP server, to 192.168.10.xxx, it will be on that subnet.