The product page on the web says that it is compatible with "DSC PowerSeries", but in parenthesis it mentions only "1555, 1555 MX, 1575, 5010 (832), 5020 (864), 1616, 1832, 1864".
I saw on Amazon someone claims that it works with PC1565 as well. Would like to verify that it does indeed. My specific module is marked 1565-300/50 V2.4ZD.
Does EnvisaLink 3 work with DSC PC1565?
Moderators: EyezOnRich, GrandWizard
-
GrandWizard
- Posts: 2354
- Joined: Tue Nov 16, 2010 4:08 pm
Re: Does EnvisaLink 3 work with DSC PC1565?
Ok, this one had us scratching our heads. That panel is from around 1996 and is referred to as a "Classic" panel, which is not compatible with the Envisalink. We pulled the manual for it and it supports all the "Power" series of expansion modules which says it will work with the Envisalink.
So the answer is.... probably. We just don't have that panel in our QA to test with so we can't confirm 100%.
You can always send it back for a refund if it doesn't work but I bet it will.
So the answer is.... probably. We just don't have that panel in our QA to test with so we can't confirm 100%.
You can always send it back for a refund if it doesn't work but I bet it will.
Re: Does EnvisaLink 3 work with DSC PC1565?
OP have you had success with the Envisalink 3 and your DSC 1565?
I'm waiting for delivery of the Envisalink 4 to go with my DSC 1565 and will update and confirm.
This should help others asking the same question.
If anyone has tried and can confirm it would be appreciated.
I'm waiting for delivery of the Envisalink 4 to go with my DSC 1565 and will update and confirm.
This should help others asking the same question.
If anyone has tried and can confirm it would be appreciated.
Re: Does EnvisaLink 3 work with DSC PC1565?
Yes I can confirm the Envisalink 4 does indeed work with the PC1565.
My module arrived yesterday and found it very easy to install and have it up and operating in no time at all.
Apparently the PC1565 is the same as Power632/PC1555.
My module arrived yesterday and found it very easy to install and have it up and operating in no time at all.
Apparently the PC1565 is the same as Power632/PC1555.
Re: Does EnvisaLink 3 work with DSC PC1565?
Thank you Ozzie for your confirmation.
This gave me confidence that it was going to work!
I received my Envisalink 4 yesterday and got installation and EyezON app for my Android and iPhone devices completed in about 2 hours.
I took it slow as I didn't want to lose track of the existing wires in the teminals.
First I disconnected the wires in the AC terminals then disconnect the wires connected to the backup battery.
Attached the Envisalink board to the box and connected to the panel using the provided 4 core wire.
Red goes to AUX positive and black goes to AUX negative.
Yellow and green to yellow and green teminals.
Then I reconnected the battery wires and then the 2 AC wires afterwards.
Plugged in an ethernet cable and proceeded to set up the devices in the web portal https://www.eyez-on.com/EZMAIN/login.php
Perhaps EyezON should add the DSC 1565 to the list of compatible alarms.
Everything's working great now.
Happy days!
This gave me confidence that it was going to work!
I received my Envisalink 4 yesterday and got installation and EyezON app for my Android and iPhone devices completed in about 2 hours.
I took it slow as I didn't want to lose track of the existing wires in the teminals.
First I disconnected the wires in the AC terminals then disconnect the wires connected to the backup battery.
Attached the Envisalink board to the box and connected to the panel using the provided 4 core wire.
Red goes to AUX positive and black goes to AUX negative.
Yellow and green to yellow and green teminals.
Then I reconnected the battery wires and then the 2 AC wires afterwards.
Plugged in an ethernet cable and proceeded to set up the devices in the web portal https://www.eyez-on.com/EZMAIN/login.php
Perhaps EyezON should add the DSC 1565 to the list of compatible alarms.
Everything's working great now.
Happy days!