Remove unused zones from zone status chart ?

[chargernut69]

Hello,

How do I remove all the unused zones in Partition 1 from the EZMAIN zone status chart ? They are disabled in the Vista 20p programming, yet show up on the chart ....

I assigned the zones to Partition 1 and Partition 2 using Zone Labels. Partition 2 only shows the zones selected... However, Partition 1 has all the other extra ones still visible (see attached). Only Zones 18,19,20,21,50,51 should be visible in Partition 1.

Any hints please ? ... thanks

[chargernut69]

Well, here is the sad news from EyeZ-On --

Hi,
That isn't possible unfortunately. The server only records which
partition a zone is on, if labelled, and what is the HIGHEST zone number on
the panel.

So guess I am stuck looking at all the zones, even the unused ones.....

[Flyct]

Well, here is the sad news from EyeZ-On --

Hi,
That isn't possible unfortunately. The server only records which
partition a zone is on, if labelled, and what is the HIGHEST zone number on
the panel.

So guess I am stuck looking at all the zones, even the unused ones.....

Thanks for posting that info. It explained why one of my locations shows 16 zones and the other showed 64. The one with 64 had panic button zone 99 labeled . I removed the label from panic zones 95-99 and now only 16 zones show up. .