Page 1 of 2
Envisalink 4 does not work with Vera according to Vera
Posted: Thu Jun 30, 2016 9:39 pm
by Mheflin
According to Vera customer support, Envisalink 4 does not work with Vera (version 2 and 3 do work). Has anyone built or found a plugin that will make it work?
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Fri Jul 01, 2016 9:34 am
by GrandWizard
The TPI is identical on all DSC versions (2,3, and 4). They are incorrect.
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Fri Jul 01, 2016 10:38 am
by Mheflin
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Wed Jul 06, 2016 8:31 pm
by Mheflin
Nope, it did not work. Trying to get a refund on the 4 and purchased a 3.
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Thu Jul 07, 2016 7:44 am
by GrandWizard
It won't help. They are identical. I use the Envisalink 4 with my own Vera Lite.
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Thu Jul 07, 2016 9:43 am
by Mheflin
Could you explain how you got it to work?
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Thu Jul 07, 2016 10:12 am
by GrandWizard
Did you try posting your debug to the Vera forum? They wrote the plug-in and would probably be your best resource. I didn't do anything other than enter my IP address and password, which I left as the default "user".
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Sun Jul 10, 2016 7:45 am
by brientim
@ Mheflin
Vera and EVL4 do work; however, the implementation on Vera has been problematic since UI7 and there has been no maintenance for sometime.
If you have changed default details see
http://forum.micasaverde.com/index.php/ ... l#msg77911
As @GrandWizard recommended post issues on the MCV forum where you would get better support.
As I no longer use Vera of this, I won't be able to assist.
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Sat Jul 23, 2016 9:24 pm
by ronross53
I use the Vera Plus with EnvisaLink 4. No problems. It was a bit tricky setting it up since the alarm zones all became active and armed, although not the alarm control (with instant notification), meaning each time I walked in front of a detector i would receive notification. That was fixed in the Vera settings.
Everything works fine.
Re: Envisalink 4 does not work with Vera according to Vera
Posted: Sun Jan 22, 2017 5:15 am
by bunnylover
I registered here just to share the news.
I just got my new VeraPlus working with a new EVL4 unit.
How?
First of all, use the instructions from the first post here:
http://forum.micasaverde.com/index.php?topic=36222.0
Second, keep your password 6 characters or less!
Many people who say "It just worked" have probably not changed the password and I think that's the difference. Argh, I wasted so much time! I hope this helps someone else.