LRR issue trying to remove 7845gsm from Vista-20p
Posted: Sat Jul 02, 2016 9:11 pm
I have had the EnvisaLink 3 for a while now using in conjunction with a Vista-20p, 7845gsm and 8551 wireless receiver.
I have now gotten rid of my alarm monitoring service and I am having all kinds of fits trying to extract/disable/remove the 7845gsm from the mix.
Things I have tried:
I have now gotten rid of my alarm monitoring service and I am having all kinds of fits trying to extract/disable/remove the 7845gsm from the mix.
Things I have tried:
- 1. Search the web high and low for how to deal with this issue - learned a lot about installing, not so much about uninstalling
2. Unplugging A/C - v20p didn't like that at all...
3. Changed *29 (LRR output) to 0 on the v20p - Stopped the errors, but I don't get any events from the envisalink
4. Looked at *79 (Output Device Mapping) but all including 12(112) is set to 0 (delete)
5. Disconnected A/C and wires to the v20p control panel - getting a "Fault 112 Relay Module" and sets off the siren every time I set the alarm, unless I manually bypass 112 first