Page 1 of 1
IP170D cannot add Foscam camera
Posted: Mon Jul 30, 2012 9:49 am
by antwerpflash
I have a Foscam camera (FI8909W) & on the same local LAN as my EnvisaLink IP170D. No matter how I add the Foscam camera, the IP170D will not display it. For the "port" field in the camera addition screen, I have tried local IP address:port (192.169.1.205:8093) ,
http://local IP address:port (
http://192.169.1.205:8093, and I have even tried the external DDNS site that is working via the internet (
www.DDNSwebsiteformycam.com). Any suggestions would be appreciated.
Re: IP170D cannot add Foscam camera
Posted: Tue Jul 31, 2012 2:48 pm
by peter101
I had similar issue. I can pull the cameras up on the computer but the link to phone does not work. It asks for the login/ password over and over. Cant view the cameras on my Iphone.
Re: IP170D cannot add Foscam camera
Posted: Tue Jul 31, 2012 3:20 pm
by antwerpflash
I figured out my own problem. In the "port" field, simply put the port (example: 8093) of the camera, NOT the fully qualified IP address with port (example 192.168.1.255:8093). Once I simply deleted the IP address and left just the port, all was good.