EyezOn Forum

Posted: **Thu Jul 06, 2017 8:27 pm**

Hello,
I have DSC 1550 and panel only has yellow and green terminals, but I cannot see black and red, do I connect those wires from Envisalink to the AUX red and black on the pic below?

Also, which particular model should I chose when activating for this panel? I bought EVL-4EZ.
When I hook up wires to AUX red and black, green on KEYB is flashing, indicating panel is not connected or wrong type selected, but panel is live...

Thank you.

Posted: **Fri Jul 07, 2017 3:01 am**

Hi,

The RED is the AUX+ and the BLACK is the AUX-.
The EVL-4 is not compatible with PC1550.

Posted: **Fri Jul 07, 2017 1:12 pm**

@gedeferenc - thank you.

Can the keypad from my 1550 be used with any power series board, so I can only change the panel and keep the keypad?

I am thinking to get 1555 to work with Envisalink....

Posted: **Sat Jul 08, 2017 11:32 am**

No, that is a "Classic" system and none of the devices are compatible with the "Power" series. Plus the Classic keypads are capital "U" ugly. Would you really want that on your wall?

Posted: **Tue Jul 11, 2017 2:44 am**

@dscheste

You need to change everything panel, keypad, end of line resistors.
EVL4 module can you used with these new panels: PC1616, PC1832, PC1864

EyezOn Forum

Where do I connect black and red on DSC 1550?

Where do I connect black and red on DSC 1550?

Re: Where do I connect black and red on DSC 1550?

Re: Where do I connect black and red on DSC 1550?

Re: Where do I connect black and red on DSC 1550?

Re: Where do I connect black and red on DSC 1550?