EVL4, struck by lightening can it be repaired diy

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
JohnCRSA
Posts: 4
Joined: Wed Mar 24, 2021 10:04 am

EVL4, struck by lightening can it be repaired diy

Post by JohnCRSA »

I have a EVL4 connected to my DSC alarm panel has worked famously. Last night had a very close lightening strike and all that seems to have failed is the EVL4 the 4 yellow LED's are flashing together slowly but dimly.

Any ideas on a DIY component replace, which ones? Any help would be appreciated.
Attachments
evl.jpg
evl.jpg (98.57 KiB) Viewed 1749 times
GrandWizard
Posts: 2272
Joined: Tue Nov 16, 2010 4:08 pm

Re: EVL4, struck by lightening can it be repaired diy

Post by GrandWizard »

We don't even attempt to repair any of our warranty returns. They are sent to a recycler instead.

Did you try power-cycling the Envisalink?

Customers with out-of-warranty devices can somtimes purchase restocked EVL4s for $60 + shipping, if any are available.
JohnCRSA
Posts: 4
Joined: Wed Mar 24, 2021 10:04 am

Re: EVL4, struck by lightening can it be repaired diy

Post by JohnCRSA »

Yeah thanks did power cycle it, its dead.
I bought a new board and will install thanks!
Post Reply