Page 1 of 1

EVL Custom Sequence

Posted: Tue May 09, 2023 12:31 am
by PEACESURVEILLANCE
Hi guys, just wondering if you could help me zero out a zone...
A client broke a door sensor and he is more than 4 hours away, he hates bypassing so would like to clear the zone until the sensor is replaced.
I am remote of course.

If you could provide the sequence I would need, I cant find much information on how to use the sequencing ?

Since DSC has now stopped making the power series I wont be using the evl module for future installs unfortunately. I will
The zone is 01, it is a door sensor.

Thank you!

Re: EVL Custom Sequence

Posted: Tue May 09, 2023 9:59 am
by GrandWizard
It works like you were in front of a keypad to allow for special circumstances like what you mentioned.

So whatever you would enter at the keypad, place in the customer sequence up to 32 characters.

Don't forget to "#" out otherwise the panel will stay in installers mode indefinitely.

So to remove the zone one you could enter

* 8 <installers code> 202 1 # #