New EVL4 - Firmware 01.00.100

Information and support for EnvisaLink modules.

Moderators: EyezOnRich, GrandWizard

Post Reply
jmvm
Posts: 2
Joined: Fri Sep 22, 2023 11:04 pm

New EVL4 - Firmware 01.00.100

Post by jmvm »

I've created an account at EyesOn, put in the last digits of my MAC addr to on-board the device.

Device gets an IP on my LAN, GW and DNS. All lights on solid except ONLINE light which is off.

Can get to web interface and it has time as "2000-00-00 00:00 - System Time"

EnvisAlerts Status
Envisalerts Server 199.63.170.125(E) - THIS IP changes occasionally, but always says offline
OFFLINE

Packet capture on my router seems to show UDP port 4021 traffic going out, but nothing ever comes back from servers.

Is my firmware too old to onboard ? Any manual firmware process? I'm technical so can work with Serial and JTAG type communications if that helps, but don't have any data on the board to make a start.
GrandWizard
Posts: 2273
Joined: Tue Nov 16, 2010 4:08 pm

Re: New EVL4 - Firmware 01.00.100

Post by GrandWizard »

You ran your device for too many years without updating to the proper firmware so it looks like your FLASH filesystem is corrupt.

If you are technical enough to set up iptables on your router then there may be a work around. Otherwise, you will need to get a new unit.

For more information submit a technical support ticket from the Eyezon portal.
Post Reply