I have a EVL4 monitoring my pc1832 and I was wanting to add more hardwire zones. I have a UNO8 that I plugged into the evl4, it detects the module on the evl4 webpage. It also gives an supervisory when unplugged on the app. Is it possible to program the uno8 as a expander with this setup? 903 shows keypad and 5400 (evl4) only so far.
Thanks in advance.
UNO8
Moderators: EyezOnRich, GrandWizard
-
GrandWizard
- Posts: 2272
- Joined: Tue Nov 16, 2010 4:08 pm
Re: UNO8
The UNO8's only work in Standalone (SA) mode, when the Envisalink is the sercurity panel, or if you have one of the new UNO panels.
If you have a DSC panel, you need to purchase a PC5108 to add an extra 8 zones to your system.
If you have a DSC panel, you need to purchase a PC5108 to add an extra 8 zones to your system.