UNO Hybrid panel change log:
Updated:Sep 11, 2024
1.0.99 - Sep 11, 2024
- UNO now supports SIA DC-09 for central station communications
1.0.98 - July 31, 2024
- Envisacor WiFi panels fully supported
- Exit fault bug fixed
- improved support for LTE fail-over
- Preliminary support for the UNO5500 advanced keypad
1.0.90 - June 4, 2024
- Support for 2-wire smoke detectors
- Zone Labels now stored within the UNO panel
1.0.88 - May 21, 2024
- Native support for DSC wireless sensors without the need for an RFK or PC51XX. Requires the UNO-RF-433 module
- Periodic Test Transmissions now supported
- Buzzer follower enabled on UNO8 expansion module PGMs
1.0.81 - Apr 18, 2024
- Tampers now make partition NOT READY
- Bug with fire zones in tamper might cause alarm fixed
- Local webpage shows which zones are tamper
- Random expansion bus faults fixed
- UNO8 PGM Pulse/Fire Reset bug fixed.
1.0.77 - Mar 18, 2024
- bug with DSC PC5108 reporting phantom open zones after leaving installers mode and remote programming, fixed.
- Bug with panel in 24 Hour fire alarm also reporting burg events before user ACK, fixed.
- Adding new zone definition, 24 Hour Misc Buzzer Only, no bell. For low priority 24 hour zones.
- Zone alarm restorals, standard and 24 hour, now report to all partitions for zones that reside in multiple partitions.
- Adding new PGM mode, FIRE RESET. You can use this just like the DSC option for 4-wire smokes that latch and require a power reset.
- Supervision and module probe now supported for UNO5108 operating in banks 8 - 15.
1.0.74 - Mar 17, 2024
- Bugs in zones that exist in more than 2 partitions fixed
- Momentary keyswitch now works on multiple partitions
- Support for the new UNO5108 expansion module, extended hardwired support to 128 zones. Backwards compatible with DSC power-series panels
- UNO5108 zone expander events now supported and logged
- Fixed bug in local time presented in human-readable form. Led to strange days-of-week and incorrect days in month.
1.0.72 - Feb 19, 2024
- Bug in Door Chime fixed
- Local Page now correctly shows whether SOLO RF 433MHz module is installed or not
- Bug in TPI for Home Assistant users that caused bogus medical alerts fixed
1.0.69 - Feb 2, 2024
- Support for legacy DSC keypads > 20 years old. (PC5020 days)
1.0.67
- *8 installers mode working for all 8 partitions
1.0.65
- *8 installers mode for keypad programming now supported. Default installers code is 5555
- *6 user functions now supporter (System Test, Contrast, Buzzer, Brightness). Master code is user code 1
- System test implemented (Bell, Buzzer, transmission to central station, transmission to Envisalerts)
1.0.63
- 5500 keypad functions, *2, *4(chime), and *7 (PGM output) now supported
- *7X support for all 8 PGMs.
- PGMs now support door chime in buzzer follower mode
- 24 Water zones now put partition into alarm, instead of just sounding bell.
- DSC KeyFob disarming now supported
1.0.57
- 24 Water Zones now put panel into alarm
- PGM Buzzer Follower now supports door chime
1.0.56
- EOL fault bug on PC5108 expanders fixed
1.0.55
- Support for Instant 24 Hour Fire Zones
- UNO8/PC5108 conlict bug fixed.
1.0.53
- Delayed Fire zones now working properly with NO contacts and EOL resistors
- Bell squawk on arm/disarm now working properly
- Zone faults and tampers now displayed on the local web page zone group
- Troubles now shown on local web page
UNO Panel Preview Firmware Change Log
Moderators: EyezOnRich, GrandWizard
-
- Posts: 2306
- Joined: Tue Nov 16, 2010 4:08 pm
Re: UNO Panel Preview Firmware Change Log
UNO PANEL ROADMAP
Many people are submitting the same feature requests so I've been given a list of features that are actively being worked on
- *9 and *0 keypad arming options
- Auto-arm/Disarm options
- Full DSC KeyFOB programming support
- Fire Trouble
- Fire Trouble with Delay
- Download keypad labels from the portal
- Add maintenance and installers code
- DSC Wireless Low-Bats
Many people are submitting the same feature requests so I've been given a list of features that are actively being worked on
- *9 and *0 keypad arming options
- Auto-arm/Disarm options
- Full DSC KeyFOB programming support
- Fire Trouble
- Fire Trouble with Delay
- Download keypad labels from the portal
- Add maintenance and installers code
- DSC Wireless Low-Bats