Envisalink Integration no longer working

[michaeltorres]

Hello,
I have been successfully utilizing the Envisalink Integration for the past three years (using the contact sensors and motion sensors that are part of my DSC security system to also trigger various home automation routines). It has been rock solid reliable until a couple of days ago. I have changed nothing in my system in the last week other than performing the routine software platform updates to my hub (C7). Starting 12/26/2023 my virtual contacts on my dashboards associated with my DSC security system contacts have failed to update their status (open or closed). When I check the contact status in the EyezOn app, Envisalink appears to be responsive and working so I believe it is a problem on the Hubitat end with Hubitat no longer recognizing the status of the contacts (since I can still access the correct status of my contacts via the EyezOn app).

I’m not certain but the timing of this seems to correspond with the next to the last software platform update (I just performed updating to 2.3.7.144 four hours ago thinking that this may correct the problem assuming that it was the previous update that caused the problem but the Envisalink Integration is still “broken”).

Also, although the Enisalink Integration was always a bit “chatty”, I noted that recently the % of busy stat has jumped WAY up to 84% and the CPU % usage is up to 10% (CPU % usage was always pretty steady at around 3-5% in the past but seems to be rather erratic and can spike to 15-20% since my last platform software update).

Has anyone else experienced a recent problem with the Envisalink Integration failing to maintain the correct contact status?