EyezOn Forum

I'm looking for a couple of beta testers who own Vista128 or Vista250 panels. I'm offering a free Envisalink 3 to anyone who's game.

You have to know how to program your panel (if you have a Vista128 then I assume you know what you are doing) and I will need access to your module directly through a port forward.

I guess just private-message me if you're interested or send Mike a message at the eyezon support email.

i am an installer mostly of honeywell panels i will be installing a 128 panel in the next few weeks i ill ask the customer if he wants to be a beta tester. just keep me in mind. thanks.

benkeim03

I have a Vista 128 panel in my home. I can provide screen shots of my panel if needed. I'm eager to get EnvisaLink hooked up to this. I can have the unit installed asap if provided. I just hooked up my business with the EnvisaLink myself.

We have Vista 128FB panels in six of our school buildings with the Vista ICM Internet Connection Module installed at many of these sites, but the ICM units became more limited as the software was upgraded and the services required outside server access to do much of use.

We are looking for an alternative to the ICM and would be willing to experiment. In particular we are interested in implementing a "door prop" monitoring system that can notify our security folks when specific perimeter doors remain open for more than a threshold amount of time (no, we were not doing that with the ICM). I am concerned about the potential latency of such a system- at one site we have over 100 polling modules with MANY PIR motion detectors continuous active during the day as students walk around. Would the eyez-on be able to keep track well enough to monitor a subset of zones to note when any one of say 15 monitored doors remains open for more than one minute continuously?

For bonus points a GUI that would let us import a floor plan of this 225,000 square foot building and overlay green/red device status indicators would be worth the investment. And of course it has to function when the Vista 128FB is disarmed during occupied hours...

Any suggestion for solutions? Previously I was looking at the Vista Gateway Module in conjunction with a portion of the PassPoint GUI, but the eyez-on may be a better solution since it looks like there is an active developer community here.