EyezOn Forum

Dear suppert,

I use 2 modes on my ademco system when i'm in the house.

Stay: where all pir is disabled but doors and windows are armed(all the time during the day)
Night-stay: when i'm sleeping and all above and mist pir are enabled(bedroom/toilet) pir disabled.

In the portal and mobile app i call only enable stay mode and not night stay. On the keypad i have the arm in stay mode again so the system goes to night stay.
If we had the option one in stay mode to go to night stay this would be very helpful for me.

Thank you

Grandwizard?

I was hoping for another user to chime in. I have really no idea about the operation of Ademco systems and can comment only on the operation of the Envisalink. The Envisalink supports the arming modes of STAY, AWAY, MAX, and INSTANT. These are the known modes of operation.

If you have more information then please forward it into our support line and I can see that it gets to the Envisacor guys.

Ademco has stay and night stay. Who to mail grandwizard.

Just email support@eyezon.com

Thanks

Support@eyez-on.com
Let me kow they will inform their developers.

To activate
Stay: code +3
Night-stay: code+33
 

This Works from custom command. Display show eithee armed stay or armed night-stay.