EyezOn Forum

I'm stuck. I have installed the Envisalink 3 module and activated it it on my Eyezon account. All indicator lights are present although the "OPER" LED seems to flash sporatically. I have a Vista- 20P. After reading the Honeywell panel programming instruction and the Envisalink 3 Quick-Start Manual, I was a little confused as to whether you activate the module before or after connecting the module to my panel. Anyway, I think the module is operating properly, but I don't know how to access the "web interface on the module" as mentioned in the Quick-Start Manual. Please help.

From the Quick Start manual


EnvisaLink Local Access
1. To access the web interface on the module, from a browser on the same internal
network type “envisalink” or the IP address of the module.
2. The default user name is “user” and the default password is “user”

I got that....I read what it say's but I don't understand it....from a browser on the same network? Where do I type "envisalink" or the address of the module? I appoligize for my lack of understanding.

From a windows computer open up your Internet Explorer or preferred web browser ie. Chrome, Firefox, Safari, etc. and type envisalink in the address bar. The address bar is usually the top bar where you will find the website address of the current web page you are on. If that does not work please let us know and we will guide you in finding the "IP address" of the envisalink.

Thanks for your help. The use of Firefox allowed me to view the Envisalink\3 webpage where IE or google would not. Anyway, I was able to get in and I am nnot up and running.

IS that suppose to say now* up and running?

Yes....up and running. Thanks.