Page 2 of 2
Re: New DSC user; help with a couple things
Posted: Mon Apr 07, 2014 8:47 pm
by mdlinkous
I have emailed him.... waiting his response. My primary reason for getting this was to go behind my dog sitter who for some reason cannot arm my system back when he leaves. After I see how good it is, I may consider their monitoring services.
Re: New DSC user; help with a couple things
Posted: Tue Apr 08, 2014 5:48 pm
by mdlinkous
Up and running!!! My installer actually emailed the installer code along with the simple instructions to enable quick arming.
Set to go! Thanks for the help!
Re: New DSC user; help with a couple things
Posted: Tue Apr 08, 2014 10:45 pm
by GrandWizard
Awesome!
Re: New DSC user; help with a couple things
Posted: Thu Apr 10, 2014 7:54 pm
by mdlinkous
OK... like I mentioned I am the average homeowner Joe... although I have a fair concept of alarm programming (probably just enough to be dangerous).
Now when I did the above mentioned steps to turn on QUICK ARM without a code... all works well with mobile portal. However, my wireless key fob now WILL NOT chip the siren when arming although it chirps on DISARM.
Before, when I had quick arm OFF, the wireless key fob chirped upon ARM and DISARM.
Is this something I just need to live with? I would rather have the Envisalink mobile portal ARM away than my key fob chirping. It was just handy to confirm that the system is armed. Now, I press the button and wonder if it is armed or there is an open zone. I use the mobile portal to verify.