Page 2 of 4
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 6:53 pm
by smyers119
Do you have any updates on this issue?
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 7:13 pm
by GrandWizard
Wait. Either post, or email to support, some pictures of your panel, and the keypad after you hit *29 in programming.
There's got to be something very simple here that we're all missing.
I would also post your question on an Ademco forum like Home Security Store's DIY forum, they might have more answers for you.
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 7:34 pm
by ludoo00
I still haven't figured it out...
Here are some pictures of the panel and what happens when I try to program *29
- pannel
- photo1.JPG (49.5 KiB) Viewed 11383 times
- after *29
- photo2.JPG (23.62 KiB) Viewed 11383 times
- after yes
- photo3.JPG (22.82 KiB) Viewed 11383 times
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 7:35 pm
by ludoo00
the last 2 pictures...
- after typing 0= quit
- photo4.JPG (22.79 KiB) Viewed 11383 times
- when verifying #29
- photo5.JPG (23.26 KiB) Viewed 11383 times
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 8:49 pm
by smyers119
Ok, So i finally found why your getting the problem! Working on a solution!
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 9:24 pm
by smyers119
I am still working on a solution. Is there any possible way you have a IP or GSM device other then the EVL3? Did you install this alarm system? as it may not be next to the panel.
Re: *29 long range radio programing problem
Posted: Wed Apr 10, 2013 9:55 pm
by smyers119
Just to give you an update I found a updated programming manual, and *29 has been changed from a data entry to a menu entry that is why you can not view it using #, giving it the ability to act as a remote 7720p programming device. Try programming it like this... *29 1,*,* <-(note 2 stars) and then set off your alarm and let me know if it shows up on eyez-on event log that the alarm went off. The only thing that it does not specify is if it is a menu entry only when there is a compatible GSM device installed or if it always acts as a menu entry.
LET ME KNOW IF THIS WORKS!!
Thanks,
Steve
Re: *29 long range radio programing problem
Posted: Thu Apr 11, 2013 4:27 pm
by ludoo00
Hi!
When I do 1,*,* I have a screen that says "enter * or #"
I tried to set off the alarm: no alert. The only one sent is when I cancel the alarm. It says opening code by user code 2.
Didn't work...
Re: *29 long range radio programing problem
Posted: Thu Apr 11, 2013 5:51 pm
by smyers119
Sorry,
It might be something eyez-on will have to change in there firmware. I sent GrandWizard the information they need to come up with a solution. It appears this is going to effect any Vista 15p or Vista 20p panel with a prom revision greater then 8.1
Re: *29 long range radio programing problem
Posted: Tue Apr 16, 2013 5:27 pm
by smyers119
Can you post what you have entered in the following fields: 48,49, 50, 53,54, 55.