Page 1 of 1
Panel Time is one hour off
Posted: Tue Apr 24, 2012 12:48 am
by mmbridges
I currently have a DSC1864 with a 2DS and the automatic time update box checked on the eyez-on.com portal. So does panel Daylight Savings Time need to be enabled or disabled? I currently have it disabled (sec 017 bit 6 off) but my panel time keeps getting updated to be one hour behind what it should be on the East Coast.
Re: Panel Time is one hour off
Posted: Tue Apr 24, 2012 7:44 am
by GrandWizard
If you have a newer panel that supports DST then you should have this turned off.
Check your Eyez-on account and make sure your current time-zone is EDT and not EST. If you set your time-zone to DST now, it will automatically be set back to standard time in the fall.
If you are still having problems email us at
support@eyez-on.com with your MAC address and we can look at you account settings.
Re: Panel Time is one hour off
Posted: Tue Apr 24, 2012 11:49 am
by mmbridges
That was it. I had my time zone set to EST instead of EDT. Thanks!
Re: Panel Time is one hour off
Posted: Thu Aug 09, 2012 10:21 pm
by Alarms50
When I set up my Eyez-On account I had the time set to EST, not EDT, which I corrected the next day. Will I need to change these settings manually in November and March, or does this change automatically?